The ALSA Library package contains the ALSA library. This is used by programs (including ALSA Utilities) requiring access to the ALSA sound interface.
Download (HTTP): http://gd.tuwien.ac.at/opsys/linux/alsa/lib/alsa-lib-1.0.7.tar.bz2
Download (FTP): ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.7.tar.bz2
Download MD5 sum: 34ceaac0d1f0fc2b1462cef7c3a6825e
Download size: 661 KB
Estimated disk space required: 33.7 MB (45.5 MB if docs are built)
Estimated build time: 0.59 SBU
JACK and Doxygen-1.4.1
In the “Sound” section of the kernel configuration, edit Advanced Linux Sound Architecture options to match your audio hardware and disable deprecated Open Sound System. Recompile and install your new kernel.
Install ALSA Library by running the following commands:
./configure --enable-static &&
make &&
make install
If you have JACK installed and you wish to build the JACK PCM plugin library, run the following commands:
cd src/pcm/ext &&
make jack &&
make install-jack &&
cd ../../..
If you have Doxygen installed and you wish to build the library API documentation, run the following commands from the top-level directory of the source tree:
make doc &&
install -d -m755 /usr/share/alsa/doc/html &&
install -m644 doc/doxygen/html/* /usr/share/alsa/doc/html
--enable-static: This switch is used to enable building the static library because some programs link against it.
/usr/share/alsa/alsa.conf, /etc/asound.conf, ~/.asoundrc and /usr/share/alsa/{cards,pcm}/*.conf
The default alsa.conf is adequate for most installations. For extra functionality and/or advanced control of your sound device, you may need to create additional configuration files. For information on the available configuration parameters, including setup of the JACK PCM plugin, visit http://www.alsa-project.org/alsa-doc/doc-php/asoundrc.php.
The ALSA Library package contains aserver, alsalisp, the libasound library and optionally, the JACK PCM plugin library.
Last updated on 2005-02-27 19:21:57 -0700